Houstonguy
05-16 01:15 PM
PD May 15 and still waiting for any sort of notice or status update...
visa_reval
04-29 11:42 AM
My correction letter reached NSC on the 28th. I haven't seen any LUDs so far. sekhar123 and sgurram, please post updates as relevant.
jliechty
May 11th, 2006, 07:44 PM
Hi -
I just bought a nikon d50 kit and the dealer sold me sigma lens' with the kit. I have since upgraded the camera body to a d70S. Now I am having problems with the lens', autofocus doesnt work all the time. Sometimes it works...then other times it wont focus at all.
Does anyone know if the sigma 18-50mm and the 70-300mm af/mf lens' are compatable with the d70s?
Sometimes Sigma lenses can have issues with different cameras because Nikon makes subtle changes to the way the camera talks to the lenses - changes that work fine with Nikon lenses but on occasion cause havok with third party lenses. If you contact Sigma, they should be able to tell you if an incompatibility between the lens and camera is indeed what is happening, and if so, they should be able to upgrade the processor in the lens (I'm not sure, but they may even do this at no cost).
The dealer told me the sigma lens were better then the nikor lens' because they have a metal mount whereas the mikor was a plastic mount. is this true and is this somethign i really should have worried about?
If you compare the Nikon 18-50mm with the Sigma 18-50mm (your Sigma is the f/2.8 model, right?), then I'm guessing that the Sigma will be better. Compared with the more expensive Nikon 18-70mm zoom that is sold as a kit with the D70s, they're probably about the same (bear in mind that I don't really know, since I've only used the Nikon 18-70 personally). I don't abuse my lenses, so what the lens mount is made of matters relatively little. In many cases a metal lens mount may be a sign of better quality in other areas including image quality, so the dealer wasn't entirely full of it, but I would be wary if someone tried to sell me something other than what I wanted for that reason alone.
I just bought a nikon d50 kit and the dealer sold me sigma lens' with the kit. I have since upgraded the camera body to a d70S. Now I am having problems with the lens', autofocus doesnt work all the time. Sometimes it works...then other times it wont focus at all.
Does anyone know if the sigma 18-50mm and the 70-300mm af/mf lens' are compatable with the d70s?
Sometimes Sigma lenses can have issues with different cameras because Nikon makes subtle changes to the way the camera talks to the lenses - changes that work fine with Nikon lenses but on occasion cause havok with third party lenses. If you contact Sigma, they should be able to tell you if an incompatibility between the lens and camera is indeed what is happening, and if so, they should be able to upgrade the processor in the lens (I'm not sure, but they may even do this at no cost).
The dealer told me the sigma lens were better then the nikor lens' because they have a metal mount whereas the mikor was a plastic mount. is this true and is this somethign i really should have worried about?
If you compare the Nikon 18-50mm with the Sigma 18-50mm (your Sigma is the f/2.8 model, right?), then I'm guessing that the Sigma will be better. Compared with the more expensive Nikon 18-70mm zoom that is sold as a kit with the D70s, they're probably about the same (bear in mind that I don't really know, since I've only used the Nikon 18-70 personally). I don't abuse my lenses, so what the lens mount is made of matters relatively little. In many cases a metal lens mount may be a sign of better quality in other areas including image quality, so the dealer wasn't entirely full of it, but I would be wary if someone tried to sell me something other than what I wanted for that reason alone.
smuggymba
08-18 11:18 PM
^^
agree with above. This forum is to press our genuine demands....not some a**holes news who brings a bad name.
delete this.
agree with above. This forum is to press our genuine demands....not some a**holes news who brings a bad name.
delete this.
more...
dpp
06-20 05:32 PM
Gurus
Please advice on the usage of A number
I came here as student and OPT before, the OPT had a A number
In my approved I-140 i had a A number, both the numbers are different
While filing the forms for 485/EAD/AP and I-693 ( medical report ) i saw a field for A number
Which number must i put in the field
Regards
Do you have I-140 approval notice with you? If so, A# is going to be there just above the Beneficiary name. Nowadays, USCIS is assigning the A# when they approve I-140. This is what i got from my attorney Rajiv Khanna. Do not listen to them who says it comes only when I-485 is approved. Once I-485 is approved, there is no need to have A# number otherthan you want to apply for Citizenship or keep it for records. So, it is useful only while applying 485 or EAD or AP.
Please advice on the usage of A number
I came here as student and OPT before, the OPT had a A number
In my approved I-140 i had a A number, both the numbers are different
While filing the forms for 485/EAD/AP and I-693 ( medical report ) i saw a field for A number
Which number must i put in the field
Regards
Do you have I-140 approval notice with you? If so, A# is going to be there just above the Beneficiary name. Nowadays, USCIS is assigning the A# when they approve I-140. This is what i got from my attorney Rajiv Khanna. Do not listen to them who says it comes only when I-485 is approved. Once I-485 is approved, there is no need to have A# number otherthan you want to apply for Citizenship or keep it for records. So, it is useful only while applying 485 or EAD or AP.
friend_in_NC
02-13 04:02 PM
When you submit your passport for renewal, they usually give you a receipt with pickup date. This date is anywhere between 2 weeks to 6 weeks.
If you want you can request them to mail your new passport by paying extra $15 for mailing.
If you are going to pickup the passport by person, then you should be there between 4PM-5:15PM. Thats the delivery time.
In DC office you can not pickup anything before 2PM. Remember this
Thanks a lot for the information. Since I had sent my renewal application via courier, I never got any pick up slip. I have paid $15 for mailing service. What I am worried is that even if I drive 5 hours to pick up, if they haven't processed my application (its close to 4 weeks now since I have applied), I will run out of options. On the website they claim that they will process in 5 business days. I must have tried close to 5 different phone numbers multiples times for past week or so. I have also emailed and faxed my query multiple times. Same result - No response at all. I just don't get how work is done at the embassy.
If you want you can request them to mail your new passport by paying extra $15 for mailing.
If you are going to pickup the passport by person, then you should be there between 4PM-5:15PM. Thats the delivery time.
In DC office you can not pickup anything before 2PM. Remember this
Thanks a lot for the information. Since I had sent my renewal application via courier, I never got any pick up slip. I have paid $15 for mailing service. What I am worried is that even if I drive 5 hours to pick up, if they haven't processed my application (its close to 4 weeks now since I have applied), I will run out of options. On the website they claim that they will process in 5 business days. I must have tried close to 5 different phone numbers multiples times for past week or so. I have also emailed and faxed my query multiple times. Same result - No response at all. I just don't get how work is done at the embassy.
more...
same_old_guy
06-26 02:20 PM
Could you please point out the section where it says dual intent for H1 will be removed ?
simon03
07-14 01:11 PM
My company attorney is not of much help. He claims given that USCIS has issued Receipt, and has not yet rejected the application, we may be ok...
For me, the risk is that USCIS rejects the application after sitting on it for 2 months...My EAD is expiring mid of Aug, and I will have to start again, and will have to be on unpaid leave.
Has anybody in the forum applied for EAD renewal and whose I-485 filing date is between August 1, 2007 and August 17, 2007 ?
For me, the risk is that USCIS rejects the application after sitting on it for 2 months...My EAD is expiring mid of Aug, and I will have to start again, and will have to be on unpaid leave.
Has anybody in the forum applied for EAD renewal and whose I-485 filing date is between August 1, 2007 and August 17, 2007 ?
more...
485Mbe4001
10-02 07:53 PM
short answer...You are the chosen one you can do what ever you want, while USCIS will do what they think is right...IMHO plenty of legal trouble for you, your company and your lawyer. While you are at it why not ask companies C,D&E to sponsor parallel applications for you, the more the merrier....i think you are a troll...Hardworking, law abiding immigrats get a bad rap because of people like you.
So am still little confused... Should I go this route... The reason is the company who is willing to do my GC is doing also in good faith. But with the economy the way it shapes up... they are not sure, but as a good faith they did agree to start my GC process. Well I will be bearing the lawyer expenses...they would manage the mandatory fees. So they have very little to loose.
What do you guys suggest! I have heard many people who work with company A and GC is done by Company B ... ( Correct me if I am wrong here)
Appreciated
So am still little confused... Should I go this route... The reason is the company who is willing to do my GC is doing also in good faith. But with the economy the way it shapes up... they are not sure, but as a good faith they did agree to start my GC process. Well I will be bearing the lawyer expenses...they would manage the mandatory fees. So they have very little to loose.
What do you guys suggest! I have heard many people who work with company A and GC is done by Company B ... ( Correct me if I am wrong here)
Appreciated
yagw
07-27 12:28 AM
I need your input.
My PD was Feb 2006-EB2.
I changed job on June 22nd to another company using EAD. Now the PD has become current for Aug.My old company and the new company are in different cities but it is the same state.
I was planning to apply for AC-21 but i have not gotten consistent pay checks yet. My first check was a partial check. I will have 2 consistent paychecks by Aug 15th.
1) Is it safe to just wait and see if i get a 485 approval without alerting USCIS about my job change?
I am thinking since the job change is very recent they might not know about this job change.
Its not mandatory to file AC21. If at all any RFE for EVL, you can respond at that time with your new job info.
2) If they denied my 485 application for any reason ,can i continue to work while i apply for "reconsidering my 485 application" and file AC-21 with the new company?
My understanding is, till your MTR is approved, you cannot work. Ofcourse, this applies only if you're using EAD based on that i-485. If you're still on H1/other visa or using EAD based on some other I-485, this wont apply to you.
Please advice what you think about this. Basically i am trying to "not rock the boat" and raise suspicion and more RFEs by notifying them about this very recent change.
I agree.. at this time just let it take the course...
Thank you very much for your advice and help in this matter.
BTW, if your address changed (since you mentioned the job is in different city), then you HAVE to file the AR-11 within 10 days. Don't take chance on that...
DISCLAIMER: I am not an Attorney and this is not a legal advice.
My PD was Feb 2006-EB2.
I changed job on June 22nd to another company using EAD. Now the PD has become current for Aug.My old company and the new company are in different cities but it is the same state.
I was planning to apply for AC-21 but i have not gotten consistent pay checks yet. My first check was a partial check. I will have 2 consistent paychecks by Aug 15th.
1) Is it safe to just wait and see if i get a 485 approval without alerting USCIS about my job change?
I am thinking since the job change is very recent they might not know about this job change.
Its not mandatory to file AC21. If at all any RFE for EVL, you can respond at that time with your new job info.
2) If they denied my 485 application for any reason ,can i continue to work while i apply for "reconsidering my 485 application" and file AC-21 with the new company?
My understanding is, till your MTR is approved, you cannot work. Ofcourse, this applies only if you're using EAD based on that i-485. If you're still on H1/other visa or using EAD based on some other I-485, this wont apply to you.
Please advice what you think about this. Basically i am trying to "not rock the boat" and raise suspicion and more RFEs by notifying them about this very recent change.
I agree.. at this time just let it take the course...
Thank you very much for your advice and help in this matter.
BTW, if your address changed (since you mentioned the job is in different city), then you HAVE to file the AR-11 within 10 days. Don't take chance on that...
DISCLAIMER: I am not an Attorney and this is not a legal advice.
more...
jonty_11
12-14 02:15 PM
Class of admission means the class/status she was admitted into the country with. So I think u should use H4. I think u should mail it together...
Tommy_S
05-12 12:25 PM
Choice of fonts is poor. :hat:
more...
GC_SUCK
09-26 11:19 AM
Thanks. But GC still sucks because of the long process. Good Luck to everyone.
PD - 04/2002
EB3 - ROW
I-485 RD - 03/2007
I-485 AD - 09/2007
PD - 04/2002
EB3 - ROW
I-485 RD - 03/2007
I-485 AD - 09/2007
jvordar
04-07 05:48 PM
ok gurus here's my situation..
1) Employer A filed my green card and I140 is approved and its been more than 180 days since 485 is filed.. no issue here... recently got my 3-year H1 extension from employer A till 2011. this extension is for 7th, 8th and 9th year... so have already crossed 6 year limit.
2) got an offer and accepted the offer from employer B and employer A does not provide any info regaring labor or I-140...
3) Since H1 extension is based on my green card application, to do a transfer or renewal, copies of I140 and labor is required (according to company B's lawyer)
4) So in this case i'm forced to use EAD and company B's lawyer are evaluating if old and new job description are same or similar...
so now my question is, is it true that transfer/renew of H1 after 6 years without the copy of I140 or labor from employer other than the one filed for your green card, not allowed? is there anything that can be done in this case?
thanks guys..
1) Employer A filed my green card and I140 is approved and its been more than 180 days since 485 is filed.. no issue here... recently got my 3-year H1 extension from employer A till 2011. this extension is for 7th, 8th and 9th year... so have already crossed 6 year limit.
2) got an offer and accepted the offer from employer B and employer A does not provide any info regaring labor or I-140...
3) Since H1 extension is based on my green card application, to do a transfer or renewal, copies of I140 and labor is required (according to company B's lawyer)
4) So in this case i'm forced to use EAD and company B's lawyer are evaluating if old and new job description are same or similar...
so now my question is, is it true that transfer/renew of H1 after 6 years without the copy of I140 or labor from employer other than the one filed for your green card, not allowed? is there anything that can be done in this case?
thanks guys..
more...
gveerab
12-29 08:38 PM
3 year h1 extension requires I140 to be approved plus non-current priority dates. You can get a copy of the approval from your attorney
You should try this option, in one of the immigration lawyer's forum they mentioned about this. If you have this you can get 3 yrs extension, that saves lot of moeny and time. It's worth exploring this option. Please share with us, if you are able to succed with this option.
u can use G-639 i.e. FOIA (DOJ) to get a copy of the approved I-140, Labor.etc. I do not know of anyone thats used a I-824.....cos sometimes USCIS also mails a copy of I-140 to the lawyer as well!
You should try this option, in one of the immigration lawyer's forum they mentioned about this. If you have this you can get 3 yrs extension, that saves lot of moeny and time. It's worth exploring this option. Please share with us, if you are able to succed with this option.
u can use G-639 i.e. FOIA (DOJ) to get a copy of the approved I-140, Labor.etc. I do not know of anyone thats used a I-824.....cos sometimes USCIS also mails a copy of I-140 to the lawyer as well!
indyanguy
09-09 11:50 AM
What I heard from one of my friend that now a days DOL issues RFE left and right but if company is ready to file for new labor and if they have open position for it .. Don't wait. Even if you get RFE you will be in line ahead of many who is thinking to apply for Eb2..
By RFEs, I assume you mean the request Business Necessity letter to clarify why this person is needed for the advertised position?
By RFEs, I assume you mean the request Business Necessity letter to clarify why this person is needed for the advertised position?
more...
hopelessGC
11-12 04:24 PM
Updates are coming in fast.
It turns out my wife is not yet elegible to get an ID card. She can get her license when I get my real copy of birth certificate and that will happen in about a week when it should come in by mail.
The problem is that she can get some sort of temporary paperwork but the official drivers license will take up to another 6 weeks to get.
Is there still no problem with traveling? I would guess not but again, as the story changes, helpful insight is very much welcome. Thanks!
A valid passport will do just fine.
It turns out my wife is not yet elegible to get an ID card. She can get her license when I get my real copy of birth certificate and that will happen in about a week when it should come in by mail.
The problem is that she can get some sort of temporary paperwork but the official drivers license will take up to another 6 weeks to get.
Is there still no problem with traveling? I would guess not but again, as the story changes, helpful insight is very much welcome. Thanks!
A valid passport will do just fine.
imconfused
07-09 09:15 PM
It's too late there's a big stick up your ass already how much farther can they really push it in.
too good!! well said!!
too good!! well said!!
senram
01-04 12:22 AM
It is possible that India might take this to WTO. But that is a long shot and by the time result comes it will be 2 years or more and law itself is irrelevant.
It's all gas gas gas... Manmohan Singh is heading one of the most corrupt & messy govt. in the history of India. All the ministers are busy looting the country and would like to make most in the remaining 3 years of their terms. Forget they will do anything that would benefit anybody else but themselves..it's only that overexcited journos ask the ministers what they will do and without even thinking they vomit nonsenses. Think logically how this can be a WTO issue, it is completely in their jurisdiction whatever fees they may want to charge, take it or move on...nobody is forcing them to use the expensive Visas ?
It's all gas gas gas... Manmohan Singh is heading one of the most corrupt & messy govt. in the history of India. All the ministers are busy looting the country and would like to make most in the remaining 3 years of their terms. Forget they will do anything that would benefit anybody else but themselves..it's only that overexcited journos ask the ministers what they will do and without even thinking they vomit nonsenses. Think logically how this can be a WTO issue, it is completely in their jurisdiction whatever fees they may want to charge, take it or move on...nobody is forcing them to use the expensive Visas ?
PD073102VA
05-21 06:45 PM
Yes, you will be allowed to get one year extensions if your labor certification was filed before the start of your sixth year. But still you need to get clarfication from an attorney. I talked to one and she told me that since mine was filed RIR and passed the state stage and I was safe but if you filed in Non-RIR and no recruiting has been done then you may not be safe.
GC4US
10-31 05:11 PM
See my signature
No comments:
Post a Comment